TEMPERATURE CONTROLLERS & INDICATORS

Our Clients can avail from us, a wide assortment of Digital Temperature Controllers that are procured from the reliable and certified vendors of the market to ensure quality. All our products are widely appreciated by the clients due to their durability, reliability, easy handling and low maintenance. In addition to this, our range is stringently checked and tested by the clients to ensure flawlessness.

DIGITAL TEMP. CONTROLLER (SETTING BY KNOB OR THUMBWHEEL)

MODEL

MDC-1911

MDC-2911

MDC-1931

MDC-2931

MDC-3931

Dimensions (HXWXD)mm

96X96X100

72X72X120

96X96X100

72X72X120

96X48X120

Setting

BY KNOB

BY THUMBWHEEL SWITCH

Display

RED,3½ DIGITS, 0.56″

RED, 3 DIGITS, 0.56″

RED, 3 DIGITS,0.4″

Control Action

ON/OFF or TIME PROPORTIONAL (TP)(Factory Set)

Input Thermocouple

J (0 to 200 ˚C 0 to 400 ˚C) or K (0 to 1200 ˚C)

J (0 to 399 ˚C) or K (0 to 999 ˚C)

RTD

  PT100 2W/3W (0 to 200 ˚C or 0 to 400 ˚C)

  PT100 2W/3W (0 to 399 ˚C)

Control Output Relay*

230V AC, 5A (1C/O or 2C/O)

SSR

24V DC ±2V

BUZZER

24V DC ±2V

Resolution

1˚C / 0.1 ˚C

1 ˚C

Accuracy

±1% of FSD

Set Point

1 set point

Relay Action

HEAT MODE or COOL MODE (Factory Set)

Power Supply

110/230V AC ± 20%, 50 Hz, 24V AC/ DC

Indication

LED To Indicate Relay Status & Sensor Break

Protection

Relay Turns Off In Case of Sensor Break

Installation

The RTD sensor should be connected to the instrument by cables of proper gauge to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.

Cut Out (Mm)

92 X 92

68 X 68

92 X 92

68 X 68

92 X 44

Mounting

Flush Panel Mounting with side clamps fixed behind the panel

 

DIGITAL TEMPERATURE CONTROLLER (Push To Set)

MODEL
MDC-1901
MDC-2901
MDC-3901H
MDC-3901V
DTC-49
Dimensions
(HXWXD)mm
96X96X100
72X72X120
48X96X120
96X48X120
48X48X100
Setting
PUSH TO SET
Display
RED,3½ DIGITS, 0.56″
RED,3½ DIGITS, 0.4″
Control Action
ON/OFF or TIME PROPORTIONAL (TP)(Factory Set)
Thermocouple
J(0 to 400ºC) or K(0 to 1200ºC) or R(0 to 1600ºC)
J(0 to 400ºC) or K(0 to 1200ºC)
J(0 to 400ºC or 0 to 199.9ºC) or K(0 to 1200ºC)
RTD
 PT100 2W/3W (0 to 400ºC or 0  to 199.9ºC or
-50.0  to 199.9ºC)
 PT100 2W/3W (0 to 400ºC or 0  to 199.9ºC)
PT100 2W/3W(0 to 400ºC or 0  to 199.9ºC or  -50.0  to 199.9ºC)
Relay*
230V AC, 5A (1C/O or 2C/O)
SSR
24V DC ±2V
BUZZER
24V DC ±2V
Power Supply
110/230VAC ± 20%,50 Hz,24V AC/DC
CutOut (mm)
92 X 92
68 X 68
44 X 92
92 X 44
45 X 45

 

UNIVERSAL INPUT TEMPERATURE CONTROLLER

UTC – 1201
UTC – 1101
UTC – 4201
UTC – 4101
96X96X75
96X96X75
48X48X100
48X48X100
90-270V AC/DC, SMPS
Upper: RED, 4-Digit, 0.56″
Lower: GREEN, 4-Digit, 0.4″
RED, 4- Digit,0.56″
Upper: RED, 4-Digit, 0.4″
Lower: GREEN, 4-Digit, 0.3″
RED, 4-Digit, 0.4″
1ºC / 0.1ºC (For Range Less than 400ºC)
± 1% of FSD
By Front Push Buttons
J (0 to 600 °C) / K (0 to 1200 °C)
PT-100 2W/3W (-99.9°C TO 400°C) Selectable
For TP: Only HEAT MODE For ON-OFF : HEAT MODE or COOL MODE or HIGH ALARM or LOW ALARM Selectable
ON-OFF or Time Proportional (TP) Selectable
Plastic ABS Box with Front and Back
92X92
92X92
45X45
45X45
Flush panel mounting with side clamps fixed behind the Panel
“OPEN” message on display for Sensor Break and LED for Relay Status Indication
Relay turns OFF in case of Sensor Break
1 Set Point

 

DIGITAL TEMPERATURE INDICATOR

DIGITAL TEMP. INDICATOR (FIX RANGE)

MODEL

MDI-1101

MDI-2101

MDI-3101H

MDI-3101V

DTI-401

Dimensions (HXWXD)mm

96X96X65

72X72X85

48X96X120

96X48X120

48X48X100

Display

RED,3½ DIGITS, 0.56″

RED,3½ DIGITS, 0.4″

Input Thermocouple

J (0 to 400 ˚C or 0 to 199.9 ˚C) or K (0 to 1200 ˚C) or R (0 to 1600 ˚C) or S (0 to 1800 ˚C) (Factory Set)

RTD

PT100 2W/3W (0 to 400 ˚C or 0  to 199.9 ˚C or -50.0  to 199.9 ˚C)

Resolution

1 ˚C  (0.1 ˚C for range less than 200 ˚C)

Accuracy

±1% of FSD

Power Supply

110/230V AC ± 20%, 50 Hz, 24V AC/DC

Installation

The RTD sensor should be connected to the instrument by proper cables to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.

Cut Out (Mm)

92 X 92

68 X 68

44 X 92

92 X 44

45 X 45

Mounting

Flush Panel Mounting with side clamps fixed behind the panel

MDI-38 Model has 4-DIGITS of 0.8” Display, SIZE: 48X96X75 with remaining specifications are as above

MDI-1106 (6-12 Zone Indicator) Model has 3½ DIGITS of 0.56″ Display, SIZE: 96X96X100 with remaining specifications are as above

 

 

DIGITAL PROGRAMMABLE PROCESS INDICATOR

PROGRAMMABLE PROCESS INDICATOR

MODEL

PIC-1101

PIC-2101

PIC-3102H

SPI-421

Dimensions
(HXWXD)mm

96X96X100

72X72X120

48X96X120

48X48X100

Display

RED, 4-Digit, 0.56″ height

Upper: RED, 4-Digit, 0.4″ Lower: GREEN, 4-Digit, 0.3″

Range

4 Digits (0 – 9999 Range & DP Selectable) Correspond to Input

Voltage,
Current

0 -10V DC, 4 – 20 mA , mV, Pulse

4 – 20 mA, 0 – 10 VDC

Other

Resistance

Retransmission
O/P (Optional)

4 – 20 mA, 0 – 10V DC

Output
(Optional)

Relay 5 Amp, 230 VAC  For Alarm or Trip Function

Aux. Supply
(Optional)

Auxiliary Power Supply For Transmitter

Power Supply

230V AC ± 20%, 50 Hz

90-270V AC/DC, SMPS

Cut Out (mm)

92 X 92

68 X 68

44 X 92

45 X 45

Mounting

Flush panel mounting with clamps fixed Behind the panel

 

POSITION INDICATORS

Digital Positon Indicator

  • Lense function, attenuated counters, display in mm or inch – all these service features render this particularly small position indicator an indispensable
  • instrument for small spindle distances.
  • Features
  • Intermediate plate for accommodation of adjustment rings and rotary shaft lip seals
  • Shaft diameters up to max. 35 mm
  • Axial seals (dustproof)
  • Clamping plate, see Accessories

Options

  • Nirosta driving shaft
  • Counter cover made of mineral glass, solvent-resistant
  • Reduction sleeves for various diameters

MECHANICAL COUNTER DISPLAY ALSO AVAILABLE