TEXTILE INSTRUMENTS
With the help of our efficient workforce, we are able to offer our clients a comprehensive range of Textile Instruments. All our products are sourced from the reliable manufacturers, who make these using premium raw material to ensure that international quality standards. Further, our team of quality controllers also checks and tests the entire range on several parameters to ensure flawlessness.
TECLOCK / FUJI JAPAN MAK MECHANICAL TACHOMETER“TECLOCK” Japan Make Hand Tachometer (Mechanical), This is clock type revolution device to measure revolution per minute of engine, machine tools and motor, and moving velocity of belt conveyor with high accuracy. This is complete machine type without battery and 3 kinds of terminal are equipped.
|
JAQUET SWISS MAKE MECHANICAL TACHOMETERSeries 250
Housing: Black anodized alloy
Dial diameters: 50 mm
Model : 252 – Range: 0…1000 rpm 0…10 m/min 251 – Range: 0…10’000 rpm 0…1000 m/min
|
DIGITAL CONTACT TACHOMETERFeatures
TECHNICAL DATA:
• Range: 60 to 50,000 RPM
6 to 5,000 Mtr/Min (Surface Speed)
• Resolution: 0.1 RPM up to 1,000 RPM/1 RPM above 1,000 RPM.
0.01M/min up to 100M/min 0.1M/min above 100M/min • Display: 5 digits, Red LED
• Accuracy: ±0.05% +1 digit
• Sampling Rate: 1 Second • Low Battery: Indicated by ‘Lobat’ when battery voltage drops below operating voltage
• Memory: ‘Last’, ‘Max’ &’Min’ memorized automatically for 120sec, can be recalled • Power Source: 4Nos-1.5V Batteries, Type R6(UM3) Size AA • Size: 200 x 75 x 40mm • Standard Accessories:
Male rubber contact tip -2pcs Female rubber contact -2pcs Pheripheral Contact rubber tip -1pc. Padded Carrying Case -1pc. User Manual -1pc. |
DIGITAL NON CONTACT TACHOMETERTechnical data:
• Range: 60 to 1,00,000 RPM
• Resolution: 01.RPM up to 1,000RPM
1 RPM above 1,000 RPM • Display: 5 digits, Red LED
• Accuracy: ±0.05% +1 digit
• Sampling Rate: 1 Second • Low Battery: Indicated by ‘Lobat’ when battery voltage drops below operating voltage
• Memory: ‘Last’, ‘Max’ &’Min’ memorized automatically for 120sec, can be recalled • Measuring Distance: 75 to 300 mm (3 to 12″) • Power Source: 4Nos-1.5V Batteries, Type R6(UM3) Size AA • Size: 200 x 70 x 40mm • Standard Accessories:
Reflective tape (marks) 1000 x 12mm (40 x 1/2″) -1pc. Padded Carrying Case -1pc. User Manual -1pc. |
DIGITAL CONTACT & NON DIGITAL CONTACT COMBINED TACHOMETEROur Tachometers range is designed specifically for speed/rate measurement and control. Hand-held type and Panel Type tachometers are available to suit any degree of user.
Hand-held
The TM-5000/5010 series is a hand-held Non-Contact/Contact Tachometer. It measures rotational and linear speeds of upto 99,999.9 rpm and measured value can be converted instantly to different units of measurements (RPM, RPS, m/min, cm/s, inch/s, ft/min and yd/min). Up to 8 measured values can be stored in internal memory. Measuring in hard to reach places is possible with the use of the Remote Sensor. Portable and very handy, no special skills required to use. Available in Kit type which includes everything needed to get you started.
CE and RoHS compliant.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
INDIAN DIGITAL STROBOSCOPE
|
IMPORTED STROBOSCOPEDescription:The model DT-2239A is a microprocessor circuit design, high accuracy, digital readout, light duty Stroboscope/tachometer that is ideal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance, production, quality control, laboratories and as well as for schools and colleges for demonstrating strobe action.
Specifications:
|
FREEZE MOTION/PRINTING STROBOSCOPEStroboscopes are extensively used in high speed rotogravure printing machine to check the printing matter quality and to observe the registration mark. We offer Stroboscope models in 250mm to 750 mm width to suit the web sizes of the machine. The flashing speed can be adjusted using internal oscillator or flashing can be triggered from external sensors such as proximity switch, mark sensors or any other sensors. A built in timer can be programmed to set checking time thus saving on flash tube life.
Features:
|
MECHANICAL STOP WATCHWe are one of the renowned importers and suppliers of Stop Watch – Mechanical in latest technology and designs. These are manually operated Watches, offered with user friendly options and provide accurate and reliable readings. Engineered using latest technology, these are quality tested products and are offered at industry leading prices. Mechanical, Stop Watches:
|
RACER DIGITAL STOP WATCHOur range of Digital Stop Watch are widely used for various applications in Laboratories and other industries. Engineered with precision, these are renowned for accurate readings and high efficiency. We are sourcing these Digital Stop Watches from reliable vendors of the industries and are offered in customized solutions as per client’s requirements and specifications
Models:
Electronic Digital Stop Watches, 1/100 Sec, with Day, Date, Month, Time, Alarm & Lap Function:
Digital Stop Watch
Features:
Stopwatch Function:
For more details please be free to email us
|
CASIO STOPWATCHHS-3V-1R This model is configured to fit comfortably in the palm of the hand, and comes with a neck strap. Stopwatch functions include 10-hour maximum, 1/100-second timing, lap time, and split times.
Measuring capacity: 9:59’59.999’’
|
LIGHT METERBacked by our best-in-class warehouse facility, we are able to store a bulk of Light Meters that are widely used measuring the light intensity in a particular area. These meters are sourced from the authorized manufacturers of the market to ensure that all the products meet international quality standards & norms. Moreover, we conduct stringent tests based on several parameters to ensure zero manufacturing defect in the final range, which is ready to deliver.
Technical specifications:
|
DIGITAL ANEMOMETERFEATURES
GENERAL SPECIFICATIONS Measurement Range Resolution Accuracy Note: m/s – meters per second km/h – kilometers per hour |
SOUND LEVEL METERWe are offering our clients a wide assortment of Sound Level Meters that are widely appreciated by the clients due to their durability, reliability, easy handling and low maintenance. Our range is procured from the trustworthy manufacturers of the market6, who make it using premium raw material to ensure quality. Moreover, we pack all the products using premium packaging material to ensure safety and security during transportation.
Technical specifications:
|
REFRACTOMETER (STARCH METER)Our clients can avail from us, a wide assortment of Refractometers (Starch Meter) that are ideal for measuring contained of liquid like sugar juice and starch. All our products are widely used for assessing harvest period of sugarcane and help in obtaining stiffness in cloth pouring correct density starch solution. Moreover, our products are thoroughly checked and tested by our team of quality controllers to ensure zero manufacturing defect.
|
MECHANICAL YARN TENSION METERA wide range of Yarn Tension Meters available with us, comes in round & pistol type models. Our range is sourced from the reliable and certified vendors of the market like SCHIMDT/ HIROSHIMA/TECKLOCK etc., who design this as per international quality standards & norms. Moreover, we test and check the entire range on several parameters to ensure quality, durability and reliability.This instrument determines load during processing of yarn while spinning and winding, followed again during warping, equipments are used and during weft winding. being very sensitive to tension they should be checked by means of tension meter. Our instruments are very sensitive, give reproducible and stable readings, if the measuring conditions are repeated, therefore it is advisable to select proper range of tension meter. We market wide range of Yarn tension meters, please contact us with your specific detail to enable us to offer suitable model. Special Features Top :
|
IMPORTED SCHMIDT YARN TENSION METERRAnalog Yarn Tension MeterSpecial Features
Standard Features
– the guide rollers
Available Models
|
DIGITAL YARN TENSION METER
Features:
|
PEN TYPE DIGITAL THERMOMETER
Specification:
|
INFRARED THERMOMETER
|
STEM TYPE THERMOMETERDigital Multi-Stem Thermometer
Portable digital multi – stem thermometer lcd portable with built – in external sensing probe (133 mm / 5”). 1 meter cable & pre settale alarm facility,
A) Model: ST- 9269 b. Range: -50 c to +200 c B) Model: ST- 9283 b. Range: -50 c to +300 c
|
WET & DRY THERMOMETER“ZEAL” English Make WET & DRY BULB HYGROMETER (Thermometer) Tubes are filled with Mercury & Fitted in a Beautiful Plastic Casing. A selection of traditional Wet and dry bulb Mason’s hygrometers. Comprising Moulded plastic wall mounted case- two thermometers mounted on a silk screened scale – plastic reservoir and cotton wicks. Supplied with wet and dry bulb tables for determining humidity levels.All parts are replaceable and available as spares Red spirit non toxic °C/°F. Range: 5 – 50 Deg.C & 20 – 120 Deg.F with Conversion Table etc. Zeal Wet & Dry Bulb Hygrometer (Mason’s Type) A selection of traditional Wet and dry bulb Mason’s hygrometers. |
HYDROMETERS :We are engaged in manufacturing and supplying of Hydrometers of superior quality range. Hydrometers is a device to measure relative density of liquids such as Grease, oil etc. Components used in a hydrometer are glass frame, cylindrical stem and bulb floating in the mercury fluid. To test the density of a liquid, we use a long glass jar. The jar is filled with liquid and hydrometer is floated inside the fluid. The liquid surface touches the stem of hydrometer at specific point, which indicates specific gravity of that fluid. Specifications: Sikes Hydrometer at 51ºF, Zeal England
|
MAGNETIC ANGLE SPIRIT LEVEL 47The MAGNETIC ANGLE SPIRIT LEVEL 47 is suitable for measurements on vertical surfaces and shafts The magnetic inserts assure an excellent adhesion to vertical shafts and surfaces
Function:
Dimensions:
Weight:
|
HORIZONTAL SPIRIT LEVEL 55 “SPIRIT”
Options:
Function:
Sensitivity:
Calibration Certificate:
|
PRECISION FRAME SPIRIT LEVEL – A58″The FRAME SPIRIT LEVEL 58 SPIRIT is suitable for measurements on vertical and horizontal surfaces and shafts Optional magnetic inserts in the vertical measuring base assure an excellent adhesion to vertical shafts and surfaces
Function:
Sensitivity:
|
UNIVERSAL ANGLE SPIRIT LEVEL 64″The UNIVERSAL ANGLE SPIRIT LEVEL 64 is particularly suitable for measurements on vertical surfaces and shafts The tubular level can, however, also be used for measuring on flat surfaces
Function:
Dimensions:
Weight:
|
PUSH PULL METER/FORCE GAUGE
Push pull Meter is a force measuring instrument for both Push and Pull. There is Zero Adjust. An additional red pointer retains the maximum reading encountered. The compression of the accessory part, an examination of pulling.
[specifications]
Accuracy : 1 division
|
MECHANICAL SPLICE STRENGTH TESTERSplice Strength Tester is available in diverse designs and technical specification to suit the requirements of different clients. This instrument can efficiently determine the splicing strength of yarn during the spinning process. We have the capability to offer them in custom-made designs and can also be availed in the following functional ranges:
|
DIGITAL SPLICE STRENGTH TESTERRange: 0 – 4 Kg.Resolution2 Gram. Display: Alphanumeric LCD Display withselection of unit in Grams, Kg, Lbs, N. Accuracy: +/- 1%Supply: 12 V Rechargeable Batteries.
Supplied with Battery Charger Mounting Arrangement: To be mounted on stand with screw arrangement provided on the backside.
Size: (mm)230 x 100 x 50 Approx.
|
TARP GAUGE
Sun tarp gauge ( top arm load gauge ) in complete kit form with all accessories such as arbours and nylon rollers from 25 mm to 75 mm for all types of drafting systems of ring frames and speed frames (as per customers’ requirements ) Sun tarp gauge ( top arm load gauge ) measure top arm roller pressure (load) in front, middle & back rollers of all types of drafting systems used today in Ring Frames & Speed Frames, such as SKF PK 225, 2025, 235, 211, 1500, 1600, 1601, 704, BM 12, 14, 15, RIETER G5/1, G6, DJ5, LF 1400, LF 1400A, SUESSEN WST UT 620, UTM 620, UTS 200, etc. The top rollers are loaded at specific levels & thus uniformity between top arms on the same frame is maintained. In the course of continuous working, however, variations occur from the set loads which affect the quality of drafted materials. Low top arm loads results in undrafted yarn, unevenness & hence affect the strength & count CV% . Excess loads also squeeze the cots & increases the power factor of the machines. Hence, frequent methodical check up & corrections of top roller loads is necessary. The instrument is suitable for cots from 25mm to 75mm diameter with least count of 0.5 kg and max. 350 kgs. It is also suitable for wool/worsted ring spinning frames like as Cognetex, NSC, & jute spinning like Mackie, DASN, etc. |
ATIRA NILOMETER
Suitable for Draw Frames, Comber, Silver lap, Ribbon Lap & also for Detecting Rollers of Combers It helps decrease Sliver CV%, Strength CV% and count CV% besides improving appreance. It has become a bench mark for spinners aiming for better Uster values. Drawing is the final stage at which the yarn count CV% can be controlled in addition to strength CV% of yarn by controlling the process such as Load settings, etc. Drafting loads vary due to reduced cot sizes, worn out journals, end bushes, eccentric bottom rollers, worn out springs, variations in line pressure, deterioration in pressure exerting hose properties, etc. NILOMETER is used to check & correct Nip Loads of top rollers in following machines : LR DO2SHARA TS 100, LH 10TRUTZSCHLER SHR 900, 1000RSB D30,D35,D40LK 250,LK54LR DO 6HARA CM 100, CM 400TEXMACO HOWA DFK 2CDUNILAP E30,E35TD 03LR E7/4, E7/5HARA VC 250, VC 300CHERRY 500,600,800,DX7ALTRIBBON LAP E4/1LR E7/5ARSB 851, SB2HARA HL 100, SL 100VOUK SH 802E, RD 300 Sliver lap E2/4ZINSER 720 Various adopters available for different makes of top rollers for draw frames, comber, lap former. |
VIBRATION METER
Product Specifications Features:
Lutron VB-8200 Vibration Meter Features:
Specifications:
|
MOISTURE METERApplication Details:
Features:
Technical Details:
Moisture Ranges:
|
ALTIMETER DIGITALItem no. 44 ST is a digital altimeter with compass and weather station. This precision instrument combines a digital altimeter with an integrated compass and a barometer for weather forecast.
|
FLUTED ROLLER WRENCHWe hold expertise in offering a superior quality range of Fluted Roller Wrench. Widely used in varied industrial applications this offered range is designed and fabricated using latest tools and machines. All these products are stringently examine on varied parameters set by the industry by our expert team of professionals. Furthermore, this range is available in varied specification with customization solution to cope up with the variegated demands of our valuable clients.
Features:
|
CARD / LEAF GAUGESWe have gained expertise in providing our clients with a comprehensive range of Card / Leaf Gauges that are procured from the authorized vendors of the market, who make these using imported spring steel. Known for durability, reliability, corrosion resistance, easy maintenance and tear resistance, our range is available at industry leading prices. Furthermore, our range is packed using premium packaging material to ensure zero manufacturing defect.
Technical specifications:
Besides gauges, our organization also exports various types of scrapper blades in steel, nylon, brass etc. These products are availed from reliable vendors of the industry and marketed at reasonable prices.
|
PRISM JAW CALLIPERAvailable in digital and mechanical types, our range of Prism Jaw Callipers has imported prism jaw “V” neck roller setting of vernier calipers. We procure all our products from the certified vendors of the market, who make these as per industry norms and standards. All our products are 100% tested and checked by our team of quality controllers to ensure durability, reliability and accuracy in results.
Technical specifications:
|
FABRIC GSM CUTTERThis instrument is a circular fabric sample cutter with which a uniform circular fabric is cut without measuring. The specimen which is cut with the help of the Fabric GSM Cutter is 100 cm2 area. This instrument is complete with a piece of cutting board and 12 spare blades.
Steps for working of the cutter are as follows:
|
DIGITAL MANOMETER
Measure gauge / differential pressure Pressure range 0~100 psi Features:
Specifications:
|
REED PICK GLASS
Features of Reed Pick Glass:
Features:
|
POCKET MICROSCOPE
Illuminated Pocket microscope, 50X-80X power, suitable to working for engineers, tool-maker, quality inspector, field researcher, collector and hobbyist. Useful educational aid for students on field visits. Hand held microscope, ideal for industrial inspection, education field trips and hobby application. Operates on two “AA” batteries· Magnification: 30x, Field of view :5mm ,Working distance :19mm Features of Handy Microscope:
Handy Microscope is Microscope & Ends Counting Equipment which gives a closer view of yarn or fabric with white led light and has measurement facilities of 4 mm measurement. |